Pages

Tampilkan postingan dengan label industry. Tampilkan semua postingan
Tampilkan postingan dengan label industry. Tampilkan semua postingan

Rabu, 15 Juni 2016

Board Meetings 3


Right Click to Download MP3
Dax is working with cypress and when he mills his boards, they start warping almost immediately.Will is making bridle joints out of cherry and finds that once the material is removed from the female part of the bridle joint, the ends start to close in a bit so that he can’t even do a dry fit. Jay is in the market for a new cyclone and needs some advice on the Clear Vue as well as metal ductwork.

If you would like to participate in a Board Meeting, you’ll need to sign up for the Wood Whisperer Guild. We’d be glad to have you!




Click Here and Start WoodWorking

Read More..

Minggu, 05 Juni 2016

Keyboard wrist protector

Shaping the wooden core.


When I built the Federal-style desk that featured in Peter Gedrys article "Antique Finish that Holds Nothing Back" I knew that it would not just sit in a room looking pretty but be used everyday by my wife in her home office. On her previous desk the slide-out tray featured a padded wrist support in front of the keyboard. The purpose was to prevent carpal tunnel syndrome developing in the wrists, a painful malady that can only be healed through surgery. I was determined to add such a support to the new desk but I wanted it to be as unobtrusive as possible. This is how I built it:


1) Take measurements of the existing pad or the keyboard and construct a wooden core. Round over the top corners, and cut 1/8-in. deep rabbets on the the underside.


2) Wrap two layers of closed-cell foam around the core and staple them inside each rabbet. Sources of foam include packing materials or you can buy sill seal used in home building.


3) Cover the foam in either leather, if youre feeling extravagant, or in my case leather-look vinyl. Either can be bought at fabric shops.


4) Fold over the vinyl at each end, cut away surplus fabric, and staple the ends down.


5) Screw on end caps with recessed screw holes and plug the holes.


6) Dye the plugs to match the end caps. I used a non-grain raising dye but even a permanent marker would work.


7) Attach the pad using screws from the underside of the tray. Start typing.

posted in: blogs, carpal tunnel, injury prevention, Keyboard wrist protector

Click Here and Start WoodWorking

Read More..

Jumat, 20 Mei 2016

Interior Designer Kara Angotti on Social Media in our Industry

Interior Designer Kara Angotti weaves video blogging into her daily design practice

Photo: http://www.youtube.com/watch?v=MXEReADq5Os&feature=related Recently Kara Angotti of KO Angotti, a woman-owned interior design and energy audit firm located in Philadelphia, ventured out of the city to visit my wood shop, Superior Woodcraft in Bucks County, PA. To share the information with her design community Kara wrote a blog post and created a YouTube video. Now it’s not every day that I have an interior designer/energy auditor/blogger come for a visit; so this had me thinking about how Kara’s social media work is completely integrated into her interior design and energy audit business.  I sought to learn more about the ways in which Kara balances her actual work with her social media marketing endeavors, and heres what I learned:

PK: Kara, why did you start to create social media for your business?

KO:        Social media marketing is a low monetary cost high impact way to reach an interested audience,which is very useful when you’re not exactly a Fortune 500 company.

Do you have specialized training in this area?

  No, I have no specialized training, but we leverage experienced consultants for effective marketing techniques.  Social media marketing is still fairly underdeveloped and is rapidly evolving; therefore it’s difficult as a business owner to maintain focus on your core service while remaining current with the latest social media marketing methods.  I suggest finding a young eager marketing professional to help guide you.  

I like what you said about underdeveloped and rapidly evolving.  To me this means you can experiment and see what works.  You don’t have to spend a lot of time worrying about making mistakes.  Everyone is learning about what works in social media. Is it difficult to create a blog and videos?

 It’s fairly easy to get started with a blog thanks to the many available platforms (Wordpress, Blogger, etc.) and templates that exist.  Videos are a bit more challenging since they require filming equipment and editing software.  I recommend beginning with a blog and establishing it as the focal point of your online social media marketing campaign.  Become comfortable blogging and expand from that point.

 How has it helped your actual interior design and energy audit business?

 Social media marketing has given us a promotional outlet that in years passed could have only been achieved through large scale and costly advertising campaigns.  It’s also provided a branding opportunity, showcase for our designs, and platform to communicate developments in the auditing industry.

What benefits could a small woodworking shop gain from creating a virtual community or social media content?

Few media outlets offer a woodworker the opportunity to broadly display their craft.  A blog  would give your clients the chance to observe your progress and review your portfolio.

What small piece of advice do you have for a woodworker who is thinking about creating a blog or shooting videos?

I recommend beginning with a blog because of the low cost of entry.  Bear in mind that consistency and the quality of your content is imperative to maintain a successful and respected blow.

Thanks to all of our readers for dropping in on the conversation between CustomMade.com member Patrick Kennedy of Superior Woodcraft, Inc. and Kara Angotti of KO Angotti. Are you using social media for your business?  What results have you witnessed?


? Or just want some advice on how to market your business and make it stand out in the marketplace? Well this blog’s for you.


A joint venture between Fine Woodworking and CustomMade, The Pro Shop will give you tips on selling custom furniture or just getting started in the business.


Questions for our bloggers? Post a comment here and we’ll try to address it in an upcoming post.


About Fine Woodworking: Your source for expert advice on woodworking and furniture making since 1975.


About CustomMade: An online marketplace designed to help serious craftspeople sell their wares and help customers locate a custom maker.



Click Here and Start WoodWorking

Read More..

Minggu, 24 April 2016

Blanket Chest Book Scores a Home Run with Industry Blog

How to Build an Heirloom-Worthy Blanket Chest
Everything you need to know packed in one solid book.


For those of you in search of a bit of project inspiration, fine woodworking contributing author Peter Turners latest book, Blanket Chests, was recently reviewed by Cabinet & Furniture Trends & Information. This collection of 30 blanket chests includes plenty of techniques as well as design and construction details for each of the pieces highlighted. Styles range from traditional to contemporary and the book is chock full of great ideas!


That Happy Few
Reprinted from Cabinet & Furniture Trends & Information


Some people call them blanket chests because they store blankets in them. Some people call them Hope Chests and give them to young ladies still in high school to fill with objects and dreams for their someday wedding. Ive also heard of woodworkers who have made some of the most intricate chests imaginable on the occasion of their own daughters weddings, a few of which were actually started while the young lady was in middle school. They can be plain or carved or elaborate, but the one element that seems to connect them all is love. Love of the recipient sometimes, love of the craft always.


One of the things those of us who have reached a certain age like to do is to make gifts for loved ones. Over the years I have made a number of college graduates very happy by cutting my own mats and then framing their diplomas with frames I designed and made myself. Another wonderful gift, for those of us who have children or grandchildren, is the blanket chest Ive described at some length.


Woodworking is an art, a skill, a passion, that most of all, a passion, because it is passion that drives a person to learn all that is required to truly be considered a master in this field. One of the things that most amazes me about woodworking, though, is the amount of skill that can be obtained by anyone willing to simply put forth a consistent effort and seek out those who know. In woodworking, as it is with anything, really, there are a handful of people at the top who do things that cause the rest of us to just shake our heads, knowing full well that we are never in this world going to be able to do something like that. But sometimes that happy few takes the time to write down their secrets in a book for the rest of us, and that, in turn, brings us to the subject of todays blog.


Taunton Press has recently published a book by Scott Gibson & Peter Turner entitled "Blanket Chests" which presents outstanding designs from thirty of the worlds finest furniture makers. It was brought to my attention by one of the featured artisans, Craig Thibodeau. As a matter of fact, Craigs Dogwood Blanket Chest was one of those featured on the cover of the book!


Craigs a local woodworker whose work I first encountered when Joe Dusel and I started this blog site in February, 2008. It was during my first panicky search for something to write about, and Joe suggested a guy he knew who did wonderful work with marquetry, and that began what is becoming a beautiful friendship. This time Craig is one of thirty, and the thirty themselves are part of something larger, the book itself.


Speaking of the other woodworkers featured throughout, I should take a moment and identify the work in the accompanying pictures. I have already identified Craig Thibodeau as the maker of the Dogwood Blanket Chest. The chest in the round was made by Gregory Smith, and the Arts and Crafts chest was made by Darrell Peart.


The guy with the beard is Peter Turner, and hes the one who takes us through the beginning part of the book, which is a short, but detailed how-to-do-it on the various joinery techniques that are employed in blanket chest making, then gets into the chests themselves. There is a wide range of chests, ranging from the fairly simple to those that would challenge almost any woodworker. A number of the woodworkers, including Craig, have taken the time to write a little about the methods used to construct their chests. But the book has a generous number of pictures and drawings throughout, enough to enable woodworkers to make most of the items featured. And for those that are a bit beyond our skill level, well, thats what practice is all about. Who knows, perhaps well join that happy few!


Click Here and Start WoodWorking

Read More..