Pages

Tampilkan postingan dengan label new. Tampilkan semua postingan
Tampilkan postingan dengan label new. Tampilkan semua postingan

Sabtu, 11 Juni 2016

Doug’s Garage Shop in Kansas


From: Doug Heacock

Location: Lawrence, KS

Hobbyist or Pro: Hobbyist

Shop Type: Garage

Square Footage: 250-499

Shop Description:
I’ve been a woodworker for years (my dad has a nice shop), but recently decided to set up a shop of my own in my 12 x 24 garage, which I’m sharing with yard tools, bikes, and camping gear. So far I have a table saw and a planer, a few smaller hand-held power tools, and a few hand tools–it’s a good start (and there’s not a lot of space for much more). I like the window next to the workbench, and even though there’s no heat or A/C, I love to be in there.



View the original article here

Read More..

Selasa, 31 Mei 2016

Unisaw Quick October 20Fine Fine Update

This past weekend I finally had a chance to put another coat on the Unisaw case - next up is a bit of wet-sanding then another coat and Im calling it done.



Ive started assembling some of the interior parts - still deciding about the motor - I have new bearings for it but may put everything together and do the motor later. This project has been taking so long that Im getting to the point where I just want to get if off the floor (it takes up a lot of space and I have to hear someone complain about it every time she walks by).

-- John
Read More..

Jumat, 13 Mei 2016

Another NEW Adirondack Wine Barrel Chair Woodworking Plans and FREE Woodworking Tips

Adirondack Wine Barrel Chair Woodworking Plans


This is our medium size Adirondack Chair.  Our Wine Barrel Adirondack Chairs is one of the most comfortable wooden chairs that you will ever sit in. The curved back, the curved seat and the curved arms allows your body to actually mold to the chair. The chair provides maximum comfort combined with a high back design that creates a chair that is truly a joy to sit in. The Chair measures:   39" H x 30" W x 41"  
Check it out at http://www.gcwoodworks.com/wine-barrel-adirondack-chair-medium.htm 




For more Award Winning Woodworking Projects go to http://www.gcwoodworks.com/index.html
FREE Woodworking Tips

Aging Wood Artificially
As wood ages, the surfaces that are exposed to light and air tend to grow darker. (Only walnut and mahogany grow lighter.) This phenomenon helps to give antique furniture its lustrous patina. When making reproduction of antiques, you can create an artificial patina by applying a 10-percent solution of nitric acid (available from most chemical-supply companies). Let the acid soak into the surface of the new wood for several minutes, then warm it with a heat gun. As the temperature of the surface climbs, the wood will suddenly turn dark. Continue to apply heat until the wood surface is dried thoroughly. When applying the acid, be sure to wear rubber gloves and a full face shield. work outdoors or in a well-ventilated room.


For more FREE Woodworking Tips go to   http://www.gcwoodworks.com/Tips%20of%20the%20Day.htm
or go to http://www.gcwoodworks.com/index.html
Read More..

Minggu, 08 Mei 2016

Seldon Bailey No 5 Patent Plane

If youve been following along, you know I managed to pick up an unusual metal hand-plane at a local yard sale. I posted about this in my last blog post, however for convenience here are a few images:

Group of Items found 2012.10.06
Plane as found
I only had a few facts to go on:
  1. The plane body is unmarked
  2. Tote and knob are both rosewood
  3. The blade adjuster has an unusual raising feature.
  4. Theres an extra cap which is secured via a cam-lock lever
  5. The blade is marked "Bailey Tool Co" in an arch across the cutter, with a medieval looking axe and Patent 1871 beneath.
Knob view





In any case, I posted the images above to the old tool group to see if I could fine out any more info. I suspected from my own searches that this plane was an early Leonard Bailey plane. I received a couple of replies identifying the plane but the best answer I received was from tool collector Josh Clark who wrote:
John-
 
Yup, its a Bailey Tool Co. jack plane all correct and proper and actually in not too bad condition. This plane was made in Woodsocket, RI by Seldon Bailey & Co., not Leonard, though Leonard did get involved at some point ca. 1878 and the whole thing gets confusing. You can see the various patents for the plane here: http://datamp.org/patents/search/xrefCompany.php?id=534  If you have an interest in mechanical stuff, the blade adjusting mechanism is really cool- its a work drive that has a very very fine adjustment tolerance, much finer than a standard Stanley plane. Cool stuff. Nice find.
 
Josh
So this blog post is basically about taking some detailed photos and getting them online (I found one photo of a similar plane, a number 4, that was shown on a For Sale page but marked as sold).

I very carefully dissembled the plane to give it a good cleaning, using only mineral spirits:


Here are some details shots of the blade adjusting mechanism:





And heres a short video of the way it works:


The other unusual feature of the plane is the cam-lock mechanism:




And heres another short video showing how it works:


Additional photos of the cleaned plane:













I received a suggestion from Josh that I might want to repair the tote (it had been badly glued together at the crack at some point and the rod would hardly pass the off-set). I undertook to use something that was reversible, in case at some point someone wanted to do a different repair, so I used a black super glue I found online, reasoning that a bit of acetone would break the repair if necessary.



I did just a little light sanding then added some shellac to approximate the sheen on the knob. Here are photos of the completed plane with just a little more cleaning an a light coat of paste wax:








Thats about it. I hope Ive managed to add to the knowledge-pool regarding the Seldon Bailey plane.

Heres a site that shows images of other Seldon Bailey planes (sold):
http://www.quietcornerantiques.com/id71.html

And heres some additional info from the Old Tools Archive:
http://swingleydev.com/archive/get.php?message_id=226226&submit_thread=1

Thanks! John
Read More..

Senin, 02 Mei 2016

DVD Video Storage Cabinet

The plans for this DVD video storage cabinet actually started out a little more interesting than the result you see here. My mother-in-law had asked me to design a shelf to store DVD?s, CD?s, and VHS tapes.


I came up with a clever shelf that was adjustable to fit various combinations of CDs and DVDs perfectly. It turns out all she really wanted was a set of simple DVD storage shelves. So I headed back to the drawing board and turned out these plans for a pretty basic DVD storage cabinet.

At first, I considered making the shelves fixed rather than adjustable. A DVD case is about 7-1/2? tall by 5-3/8? deep so the 8-1/2? tall clearance would have been fine. However, by making the shelves adjustable it will be useful for storing other things as future needs change.

Material I?m quite sure that you?re all getting pretty sick and tired of me building things out of 3/4? white melamine. But this time in particular, that?s what she asked for! My in-laws just had some new cabinets installed as part of a dining room addition and everything is white. So in this case, white melamine really did fit in okay.


I should take a moment to mention that there are significant differences in the quality of various brands and grades of melamine panels. This is probably why it often gets such a bad rap. I picked up some melamine at the local ?home improvement warehouse? and it turned out to be complete garbage. The core was a very poor grade of particle board, making it completely unsuitable for building cabinets.


For the DVD video storage cabinet I bought a reputable brand of melamine from a lumber yard that often deals in factory seconds. The core was a dense, good quality particle board, but the face had several blemishes in it that really caused problems when I laid out the sheet for cutting. Also, the price was very little different than what I would have paid for a high quality panel at a commercial lumber supplier. The bottom line is that it pays to shop carefully when choosing your materials.

Construction The DVD storage cabinet is really just an open wall cabinet with a couple of minor adjustments. First, since I wanted a specific clear distance between the shelves, I placed the shelf support holes at intervals other than the standard 32mm. Keeping 8-1/2? between shelves allows enough room for a DVD (or VHS tape?they?re the same height) plus a bit of room to reach in and pull the disc or tape off the shelf.


As I was designing the original DVD video storage plans, I needed to center the adjustable shelves on the support holes. Normally the shelf sits slightly above the hole, depending on the shelf pin or support used. To achieve the look and spacing I wanted, I opted for an angled steel shelf support. They?re available for use in both 5mm and 1/4" holes and they allow the shelf to sit approximately centered on the hole.
Wall Mounting One of the things that makes this DVD video storage cabinet unique is the method used for mounting it to the wall. Rather than screw the cabinet directly to the wall, it is hung on a pair of beveled rails called a French cleat. One cleat is attached to the cabinet and the other is attached to the wall. The cabinet is then hooked onto the wall cleat. A screw can then be used through the bottom nailer to prevent the cabinet from being lifted up off the cleat.


Hanging wall cabinets using a French cleat is actually pretty common. In fact, there are several commercially produced metal variations on the wooden French cleat that I?ve employed here. A couple significant advantages of using a French cleat are increased strength and a better ability to hang your cabinets level and plumb.


Strength is improved, especially in a long run of cabinets, because the wall cleat runs the full length of all the cabinets and is screwed to every stud. Sometimes with long runs of narrow cabinets you?re only able to fasten a cabinet to one stud. By using a French cleat, the weight of the cabinets is evenly distributed between all the studs.


Leveling your cabinets is also easier with a French cleat. You only need to level and plumb a 4? wide board. This is so much easier to handle than four or five cabinets ganged together. It?s also possible to shim the wall cleat away from the wall if the wall isn?t perfectly straight.


In my particular case I was most interested in the French cleat because it allowed me a very simple, concealed method of fastening the DVD video storage cabinet to the wall. Since both cleats are completely enclosed between the cabinet back and the wall, you can hang it without any exposed fasteners. This cabinet is so small that I wouldn?t even add the screw through the bottom nailer.

Drawing File I suppose this has digressed from how to build a DVD storage shelf into a discussion on avoiding poor quality sheet goods and a mini primer on the use of French cleats for hanging cabinets. If after all that you still want to see some plans for DVD storage, then just click on the link below. If youd like to download a copy to your computer, right click then "save-as". Either way, youll need the Adobe reader to view the file.


View or Download "DVD Video Storage Cabinet Plans"


Return from DVD Video Storage Cabinet
to Furniture Plans


Click Here and Start WoodWorking
Read More..

Rabu, 27 April 2016

New Hot Rod Powered Drivers from DeWalt

June 24th, 2011 in blogs         7 users recommend $(document).ready(function() {$("a.popit").fancybox();}); Photo: courtesy of DeWalt

The cordless-tool power race has a bunch of new hot rods competing for pole position.  DeWalt just released news about a series of compact 20-volt lithium ion powered drills and drivers.  The 20-volt MAX Lithium Ion mighty-midget drill and drill-drivers combine big power in a manageable size.

First off, the line is a DCD780C2 Li-Ion Drill/ Driver that delivers power from a 1.5 Ah battery through a two-speed transmission offering 0-600 rpm for heavy driving and 0-2,000 rpm for efficient drilling. A 1/2in. keyless chuck keeps small bits centered without the inherent run-out of hex-collet bits. Combine this accuracy with a 15 position clutch and this little brute becomes adept at installing hinges and hardware that require high accuracy and a delicate touch.  

DeWalt paid careful attention to the weight balance of the motor and battery for a more comfortable, lighter feel. Combined with a well-shaped grip this drill should be very pleasant to use and the built-in LED light will bring accuracy to dark corners. The light has a 20-second delay after trigger release.

An included belt hook and bit holder can be mounted on either side of the drill for those who like to drive on the left side.

The drill will run about 220 bucks with two batteries, a fast charger, and a case.

Next up are the DCD780C2 and DCF885L2 1/4in. impact drivers.  These two are identical except for the battery ratings with the C2 running on 1.5 Ah and the L2 using a 3.0 Ah battery. 

A short  5.5 inch overall length, excluding the driver bit, and a svelte 2.8 pounds of weight make this little driver king of the long reach.  The drivers have a one-handed loading, 1/4-inch hex chuck that will accept 1-inch bit tips keeping that short overall length useful. These powerful little drivers produce 117 foot/pounds maximum torque and up to 3200 impacts per minute for serious driving power in a small compact frame.

An LED light, belt hook and bit holder add convenience.

The 1.5 Ah driver sells for around 220 bucks while the 3.0 Ah will run about 270 bucks. Both come with an extra battery, fast charger and a storage case.

A full size drill, rotary hammer, circle saw and reciprocating saw round out the 20-volt MAX Lithium Ion line-up.

Eight different kits ranging from a compact drill - driver combo to a complete assortment of the 20-volt MAX tools are available so you can pretty well custom tailor your setup to your needs without buying tools you wont often use.

Expect the DeWalt 20-volt MAX Lithium Ion tools to be available in September.

posted in: blogs, dewalt, cordless drills, drivers
document.write();document.write();

If you enjoy woodworking then you probably also suffer from an addiction to tools. Whether you collect hand planes or seek out the latest and greatest in power tools, our expert tool addicts will keep you in the loop with news, reviews, and commentary on the latest in woodworking tools.

New: Don’t miss posts by contributing editor Roland (aka Rollie) Johnson. Over the year’s Rollie’s tested countless tools for the magazine. His fascination with motors and gears goes beyond woodworking, hes also an enthusiastic hot-rodder who likes to restore old cars, and is the author of Automotive Woodworking (Motor Books International, 2002).

Contact us: Keep us in the loop on tool news or ideas for this blog. Email the editors at fw at taunton.com or “tweet” Rollie via Twitter at https://twitter.com/Toolwriter.



View the original article here

Read More..

Jumat, 22 April 2016

Antique Woodworks

Antique Woodworks: "Types Collectible of Antique Woodworks

Woodworking is one of the oldest crafts known to man. Wood has long been a staple material for mans many arts and crafts, being used to create everything from homes to toys to tools. Carpentry has evolved over the years with the introduction of power tools which allow woodworkers to make things faster and more efficiently, but the appeal of antique items created the old fashioned way, with chisels, saws, and hammers, have their own appeal to collectors."
Read More..

Senin, 18 April 2016

New Lumber Yard Eutree com

Saturday afternoon I took my neighbor and fellow woodworker John Stephens to visit a newly advertised lumber yard. This was the post I spotted on the Atlanta CraigsList:

Hardwood Lumber Sale
All lumber is Commercial Kiln Dried. All lumber is 4/4 unless noted. Minimum purchase $100, may offer package for all lumber in one stack.

Quarter Sawn Red Oak - 4 to 11 inch width and very clear, most will grade FAS - a portion has already been surfaced to 7/8ths. $2.50BF

Quarter Sawn White Oak - FAS Grade - $3.00BF - Some very large 6 and 8/4 sections perfect for bartop or judges paneling.

Black Walnut - 6 to 7 inch wide - $4.00 - some may be 8/4

Cherry - 1Common and FAS - 4 to 12 inches wide $2.75 to $3.75
Assorted Beech, Persimmon, various species also onsite and available.
Assorted Artisan Slabs and Hardwood Flooring also onsite and available.
All species are available already surfaced for a small charge.
We will be open to the public this saturday between 1 and 5. Our company is Eutree Lumber and can be viewed at www.Eutree.com

I thought the pricing looked very good and went to the website. As many of you know Im a web geek, chronic recycler/restorer and something of a design freak - I thought both the web design and messaging were exceptional. Although many of the smaller lumber providers in the area have a similar method - buying trees downed by tree removal services for lumber - this was the first company that really extends the idea of using that as part of their marketing message (the web concept is that they dont "mine" forests, instead only preparing lumber made from hand-picked timber provided by tree removal services, in case the above doesnt make sense and you dont feel like going to the website).

I picked up John around 1:30ish and headed down to Mableton (thats on the west side of the perimeter right off of I285). As we drove, I realized that we would be going right past Hardwoods Inc (Eutree is on the same road heading south). There isnt a sign but an entryway on the Eastern side of the road - if you go youll see huge trees stacked in the background with drying stacks on the North side and a couple of front-end loaders. I parked on the left next to this:


Im not sure if you get the scale of that log - its about 40 inches in diameter. I was greeted by one of the partners, (no longer with the company), who added us to tour he was giving to some other visitors. These are the warehouse shots:

Stacks of dried Red, White and QS Oak

Stacks of dried Cherry, Maple and Walnut

Wide Oak Boards

Slabs and Specialty Lumber
Those spalted maple slabs you see are from a 20+" wide log - its also cut at 6/4 so you can see the thickness - what a beautiful table youd get out of that one piece!

Really Beautiful Walnut
 So when you look at the photo above, youll see some really beautiful walnut that hasnt been steamed to that muddy gray color - one of the main enticements for using a small specialty lumber yard like Eutree is to get your hands on something with some character. This walnut is really exceptional.

Couple of slab tables
 One of the partners is actually a woodworker - the advantage is that he knows what to look for in unusual timber and species.

Milled lumber air-drying, waiting for the kiln (man I need to get lose some weight! My friend John Stevens in on the left.)

More air-drying stacks

Founder (no longer there) shows the width of some QS boards

Slabs on a front-loader


The sawmill

Some of the largest Holly Ive ever seen


To give you an idea of scale

Imagine what you can make from this Holly!

Eutrees newly built kiln

Two 6/4 Persimmon boards I purchased

Holly Log and 8/4 Spalted Maple Slab

Two Persimmon boards waiting to be added to my stacks
Before leaving I spied some really beautiful 6/4 persimmon - those went home with me along with a couple of gifts Joel offered me for a club raffle - a 6-8" diameter Holly log and an 6/4 spalted maple slab.

Overall I enjoyed my visit and tour of the yard quite a bit. I met two of the partners (One, no longer with the company, and Sims) and discussed at length what would interest area woodworkers the most in lumber. I stressed that unusual species that are atypical would be more marketable than those species that everyone in the area carries. Also thick cuts - their prices are already really good. They also expressed some interest in perhaps doing a presentation to the GWA class. The business is young, but that also makes them very flexible and I think theyre off to a good start. If youre in the area you should definitely give them a try.

-- John
Read More..